Beeswax in the raw

Which Frames?

There is a lot of bewilderment over which frames to use but there shouldn’t be.  Once you understand what the different types are designed to do, the confusion is gone.

In this part of the world we tend to use either National or Commercial hives. Either way, the same principles apply – the only difference being the length of the lugs – that’s the bit you get hold of.

Basically there are two types of frame: Manley or Hoffman. Both are defined by their side bars.

You will sometimes see straight, narrow side bars which are neither Hoffman nor Manley – avoid them because you will need to consider how to space them and it’s not worth it in my opinion. Trust me – I’ve been there.

Here’s a picture of some parts – click it for a better view

Frame parts for bees

Hoffman Frames

Hoffman frames are self-spacing. The side bars are tapered from top to bottom – measuring 1 and 3/8″ at the top which is the spacing required for frames in the brood box.

The edges of each side bar have one flat face and one wedge shaped face. When they have been properly made, the wedges meet the flats of the neighbouring frames and this prevents the bees from gluing them too firmly together with propolis.

The top bar can be either 7/8″ or 1 and 1/16″ wide but this does not affect the spacing. Traditionally it was the latter, but the broader bar seems to discourage the bees from building burr comb to narrow the gap. This has implications for the modern beekeeper who must now carry out midwinter oxalic acid trickle treatment – then the burr comb can be a hindrance so the less of that stuff the better.

Generally a wooden brood box will hold 11 Hoffman frames and one dummy board or – depending on the interior dimensions of your particular box (they do vary) – it may hold 12 at a push. It’s up to you whether you want them tight or loose but remember, mid season the queen may be on the back frame and may get ‘rolled’ when you drag that tight back frame out.

Poly boxes vary as to how many frames they will hold.

Hoffman frames are also available as shallows but only get these if you are considering running what is known as a ‘One and a half’ system.

Manley Frames

Manley frames are designed especially for supers – for honey in other words.

The side bars measure 1 and 5/8″ across so the spacing is 1/4″ wider than Hoffmans. The reason for this is to encourage the bees to draw the wax out further.

Manley frames also have special broad bottom bars and you always use the broader top bar. Together these form a boxlike frame which reduces the amount of wax the bees have to draw and maximises honey space.

Each frame holds very much more honey as a result and you will have less uncapping to do.

The bees will glue the flat faces of these side bars on adjacent frames together quite firmly but you wouldn’t normally be manipulating these frames as you would in a brood box

Wooden supers hold 10 Manley frames. Poly supers vary – those with very thick walls will hold only 9 frames.

Copyright ©, 2015. All Rights Reserved.

4 thoughts on “Which Frames?”

Leave a Reply to Shane Cancel reply

Your email address will not be published. Required fields are marked *

three × 4 =